Amer-networks E5Web GUI Manual do Utilizador Página 243

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 242
Interface: wan
Network: all-nets
Gateway: isp_gw_ip
3. Click OK
3.11.5. Creating IP Rules or IP Policies
Before traffic can flow to the ISP, appropriate IP Rule objects must be created to allow the traffic
to pass. An alternative to using IP rules is to use IP Policy objects which can simplify this process if
other options such as application control are being added.
At minimum, DNS and HTTP traffic should be allowed to flow so that web surfing can take place.
It may also be necessary to use NAT to share the single external IP address assigned to the
Clavister Security Gateway so that the internal network topology of private IPv4 addresses is
hidden.
If, for example, web surfing is going to be done from clients on the internal network lan_net
attached to the lan interface to the public Internet connected to the wan interface, then the IP
rules for DNS and HTTP would be:
Action Src Interface Src Network Dest Interface Dest Network Service
NAT lan lan_net wan all-nets dns-all
NAT lan lan_net wan all-nets http-all
The service http-all includes both the HTTP and HTTPS protocols but not DNS so a second rule of
policy is needed. The single service all could have been used in a single rule but this is not
recommended as this means connections could be opened on any port number which can
compromise security. The best approach is to define the filter for traffic as narrowly as possible
which has been done here.
Example 3.44. Creating IP Policy Objects for Internet Access
This example creates an IP policy called surf_http that allows clients on the lan_net network to
access the public Internet. It is assumed that traffic is being NATed to the Internet using the
public IP address of the wan interface.
A second policy is also created called surf_dns which allows DNS queries.
Command-Line Interface
Create policy for the http-all service:
Device:/> add IPPolicy
SourceInterface=lan
SourceNetwork=lan_net
DestinationInterface=wan
DestinationNetwork=all-nets
Service=http-all
SourceAction=NAT
Name=surf_http
Repeat for the dns-all service:
Chapter 3: Fundamentals
243
Vista de página 242
1 2 ... 238 239 240 241 242 243 244 245 246 247 248 ... 776 777

Comentários a estes Manuais

Sem comentários