Amer Networks SS2GD8IP Manual do Utilizador Página 182
- Página / 347
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Publication date:Dec., 2010
Revision B1
170
3-14. STP Configuration
The Spanning Tree Protocol (STP) is a standardized method (IEEE 802.1D)
for avoiding loops in switched networks. When STP is enabled, ensure that only
one path is active between any two nodes on the network at a time. User can
enable Spanning Tree Protocol on switch’s web management and then set up other
advanced items. We recommend that you enable STP on all switches to ensure a
single active path on the network.
3-14-1. Status
Function name:
STP Status
Function description:
In the Spanning Tree Status, user can read 12 parameters to know STP
current status. The 12 parameters’ description is listed in the following table.
Fig. 3-151
Parameter description:
STP State:
Show the current STP Enabled / Disabled status. Default is “Disabled”.
Bridge ID:
Show switch’s bridge ID which stands for the MAC address of this switch.
Bridge Priority:
Show this switch’s current bridge priority setting. Default is 32768.
Designated Root:
Show root bridge ID of this network segment. If this switch is a root
bridge, the “Designated Root” will show this switch’s bridge ID.
- SS2GD8IP/IPH 3
- User's Manual 3
- Table of Contents 6
- Revision History 9
- Caution 10
- Electronic Emission Notices 10
- Warning: 11
- About this user’s manual 13
- 1. Introduction 14
- Key Features in the Device 15
- 1-2. Checklist 18
- 1-3. Features 18
- LED Color Function 21
- 2. Installation 23
- 2-1-3. Cabling Requirements 25
- 26
- Ethernet LAN 31
- 2-1-5. IP Address Assignment 32
- 1 0000000 34
- 1 1111111 34
- 2-2. Typical Applications 36
- 3. Operation of Web-based 38
- Fig. 3-2 40
- 3-1-1. System Information 43
- 3-1-2. Account Configuration 45
- 3-1-3. Time Configuration 46
- 3-1-4. IP Configuration 49
- 3-1-5. Loop Detection 52
- 3-1-6. Management Policy 53
- Fig. 3-9 54
- Fig. 3-10 54
- Port: 56
- Desc: 57
- 3-1-9. Virtual Stack 58
- 3-2. Port Configuration 60
- 3-2-2.Port Status 62
- Fig. 3-14 63
- 3-2-3. Simple Counter 65
- Auto-refresh: 66
- 3-2-4. Detail Counter 67
- 3-2-5. Power Saving 70
- 3-3. VLAN 71
- 3-3-2. Tag-based Group 72
- Fig. 3-20-1 74
- Fig. 3-20-2 74
- 3-3-3. Port-based Group 75
- Delete Group: 76
- 3-3-4. Ports 77
- 3-3-5. Port Isolation 79
- 3-3-6. Management VLAN 80
- 3-4. MAC 81
- 3-4-2. Static Filter 83
- 3-4-3. Static Forward 84
- 3-4-4. MAC Alias 85
- 3-4-5. MAC Table 86
- 3-5. PoE 87
- 3-6. GVRP 89
- Disabled: 91
- Enabled: 91
- 3-6-2. Counter 92
- 3-6-3. Group 94
- 3-7-1. Ports 95
- 3-7-2. Qos Control List 97
- Revision B1 100
- Revision B1 101
- 3-7-3. Rate Limiters 102
- 3-7-4. Storm Control 103
- 3-7-5. Wizard 104
- 3-8. SNMP Configuration 113
- 3-9-1. Ports 121
- 3-9-2. Rate Limiters 123
- 3-9-3. Access Control List 124
- Fig. 3-67 Ingress Port 125
- Fig. 3-68 125
- Fig. 3-69 Frame Type 126
- Fig. 3-70 126
- Fig. 3-118 Action 140
- Fig. 3-119 Rate Limiter 140
- Fig. 3-120 Port Copy 141
- Fig. 3-121 DMAC Filter 141
- 3-9-4. Wizard 153
- 3-10. IP MAC Binding 159
- Fig. 3-143-1 160
- 3-11. 802.1X Configuration 161
- Fig. 3-53 162
- Fig. 3-54 162
- Fig. 3-55 164
- Table 3-3 164
- 3-11-1. Server 165
- 3-11-2. Port Configuration 167
- ForceUnauthorized: 168
- ForceAuthorized: 168
- 3-11-3. Status 170
- 3-11-4. Statistics 171
- 3-12. TACACS+ 172
- 3-12-2. Authentication 173
- 3-12-3. Authorization 174
- 3-12-4. Accounting 175
- 3-13. Trunking Configuration 176
- 3-13-1. Port 177
- 3-13-2. Aggregator View 179
- Fig.3-149-1 180
- 3-13-4. LACP System Priority 181
- 3-14. STP Configuration 182
- 3-14-2. Configuration 184
- Fig. 3-153 186
- 3-15-1. Status 189
- 3-15-2. Region Config 190
- 3-15-3. Instance View 191
- Fig. 3-158 192
- Fig. 3-159 192
- Fig. 3-160 192
- Fig. 3-161 192
- Fig. 3-158 Instance Config 193
- Fig. 3-159 Port Config 194
- Fig. 3-160 Instance Status 195
- Fig. 3-161 Port Status 197
- Fig. 3-162 199
- Multicast 200
- 3-17-2. IGMP Proxy 201
- 3-17-3. IGMP Snooping 203
- 3-17-4. IGMP Group Allow 204
- Fig. 3-164 205
- 3-17-6. MVR 206
- 3-17-7. MVID 207
- 3-17-8. MVR Group Allow 208
- 3-17-9. MVR Group Membership 209
- 3-18-1. Events 210
- 3-18-2. Email 212
- 3-19-1. DHCP Snooping State 213
- 3-19-2. DHCP Snooping Entry 214
- 3-19-3. DHCP Snooping Client 215
- 3-20. LLDP 216
- 3-20-2. LLDP Entry 218
- 3-20-3. LLDP Statistics 220
- 3-21. Save/Restore 222
- 3-21-1. Factory Defaults 223
- 3-21-2. Save Start 223
- 3-21-3. Save User 223
- 3-21-4. Restore User 224
- Fig. 3-171 225
- 3-23. Diagnostics 226
- 3-23-2. Ping 227
- 3-24. Maintenance 228
- 3-25. Logout 229
- 4. Operation of CLI 230
- Management 230
- Fig. 4-1 231
- 4-2. Commands of CLI 232
- 802.1X 238
- account 243
- HTTPs 245
- alarm 252
- autologout 257
- config-file 257
- firmware 258
- hostname 262
- ip_mac_binding 266
- loop-detection 267
- <<set clear>> 270
- <<alias>> 276
- <<static-mac>> 280
- mirror 282
- per port restricted role 287
- multicast 292
- policy 301
- <<qcl>> 312
- <<rate>> 314
- reboot 317
- runconfig 317
- <<set trap>> 321
- Example: 322
- syslog 325
- system 326
- traplog 328
- trunk 330
- 5. Maintenance 342
- Appendix A Technical 343
- Specifications 343
- Hardware Specifications 344
- Appendix B Null Modem Cable 346
Manuais e produtos relacionados com Comutadores de rede Amer Networks SS2GD8IP
(18 páginas)© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.022 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais